User Manual

46
III-6-1. Time Setting
You can configure the time zone settings of your
access point here. The date and time of the
device can be configured manually or can be
synchronized with a time server.
Time Zone
Select the time zone of your country/ region. If
your country/region is not listed, please select
another country/region whose time zone is the
same as yours.
Time Server
Address
This access point supports NTP (Network Time
Protocol) for automatic time and date setup.
Choose a time server from the drop down
menu, or input the host name or IP address of
the IP server manually.
Daylight Savings
If your country/region uses daylight saving time,
please check the “Enable Function” box and
select the start and end date.