User Manual

50
III-7 Configuration Tool
The access point’s configuration tool enables you
to back up the settings, upgrade the firmware and
reset the device. Select “Configuration tool” from
the sidebar.
Backup Settings
Click “Save” to save the current settings on
your computer as config.bin file.
Restore Settings
Click the browse button to find a previously
saved config.bin file and then click “Upload”
to replace your current settings.
Restore to Factory
Defaults
Click “Reset” to restore settings to the
factory default. A pop-up window will appear
and ask you to confirm and enter your log in
details. Enter your username and password
and click “Ok”. See below for more
information.