Installation Manual

6
6. Follow the on-screen instructions for your selected mode to complete
setup. The rest of this guide will use “Wi-Fi Extender” mode as an example.
For more information on other modes, please refer to the user manual or
VI. Access Point Mode.
7. Please read the on screen instructions about selecting a good location for
your wireless extender and then click “NEXT” to continue. You can check
your signal strength on the next page.
8. Select your Wi-Fi network from the list and enter the security
key/password. You can also enter a new Wi-Fi network name (SSID) if you
wish. Click “Next” to continue.
By default, the Wi-Fi extender’s new wireless network name
( SSID) is your existing router/access point’s SSID + _2EX. For
example if your router’s SSID is “Your SSID” then the
EW-7438RPn ’s SSID will be “Your SSID_2EX”. You can change
your extender’s new SSID in the “Extender Device SSID” field.