Quick Installation Guide

21
VI Using the Adapter
After you have installed the driver (and, where necessary, disabled other
adapters), users can connect to a Wi-Fi network or Bluetooth device (windows
users only) using the adapter as you would normally do so and is
demonstrated below.
VI-1 Windows – Wi-Fi
Below is an example of how to connect using Wi-Fi - the process may vary
according to your Windows edition.
1. Locate the network icon in the system tray. The icon should look like (or
similar on different editions of Windows) the icon shown below:
2. Click the network icon to display a network list. Search for the SSID of
your Wi-Fi network and click Connect. If you set a password for your
network, you will then be prompted to enter it.