EW-7611ULB V2 Quick Installation Guide 11-2021 / v1.
Contents I. Product Information & Safety Information .............1 I-1.Package Contents ......................................................................2 I-2.System Requirement ..................................................................2 I-3.Hardware Interface ...................................................................3 I-4.LED Status ..................................................................................3 II. Hardware Installation .........................................
I. Product Information & Safety Information The EW-7611ULB V2 is a nano-sized 2-in-1 Wi-Fi USB Adapter with Bluetooth 4.2 that supports Wi-Fi up to 150Mbps and allows users to connect to the Bluetooth devices such as mobile phones, tablets, mice, keyboards, printers and more. When connected to an EW-7611ULB V2 network, you can experience secure web surfing (WEP 64/128, WPA, WPA2 and IEEE 802.1x).
I-1. Package Contents EW-7611ULB V2 Quick Installation Guide I-2. System Requirement Wi-Fi & Bluetooth Drivers: • Windows 10 (Support Wi-Fi and Bluetooth drivers) • Linux, kernel 2.6.24 ~ 5.8 (Support Wi-Fi and Bluetooth drivers) *Additional version information will be announced on the EDIMAX website.
I-3. Hardware Interface 1 2 No. Description 1 USB 2.0 Type A 2 I-4.
LED Name Light Status Description OFF Bluetooth Power Off On in Blue OFF Wi-Fi Bluetooth Transmitting data or management information Power Off Blinking in Yellow WLAN Transmitting data or management information II. Hardware Installation Please follow the steps below to install your Wi-Fi USB adapter, 1. Turn on your PC. 2. Insert the USB adapter into an available USB port of your computer. Never use force to insert the USB adapter.
III.Driver Installation Please follow the steps below to install the EW-7611ULB V2 Windows driver. III-1. Windows 1. Go to Edimax website (https://www.edimax.com/edimax/global/). 2. Enter model no. “EW-7611ULB V2” into the search box to search for your product, and Go to Download, and download the driver. 3. Open the folder and double driver.
4. Click “Next” to continue and follow the instructions on-screen until installation is complete. 5. Select restart your computer now or later and click “Finish”.
IV. Uninstall A Driver Please follow the steps below to uninstall a driver for your USB adapter, IV-1. Windows 1. Open Control Panel using the Start menu or Search function. 2. Select Uninstall a program under the Programs category.
3. Select Edimax EW-7611ULB V2 (or similar) and click Uninstall. 4. Click Yes to continue. 5. Click Finish to complete the uninstalling.
V. Connecting to Wi-Fi Please follow the steps below to connect your Windows to Wi-Fi via EW-7611ULB V2. V-1. Windows Below is an example of how to connect. NOTE: The process may vary according to your Windows edition. 1. Click the network icon (examples below) in the system tray and select “Connect to a network”. 2. Search for the SSID of your Wi-Fi network and then click “Connect”. If you set a password for your network, you will then be prompted to enter it.
3. After correctly entering your password, you will be successfully connected to your Wi-Fi network. NOTE: To ensure that your USB wireless adapter can function correctly, it is recommended that you disable any other existing wireless network adapters installed on your computer.
COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, 2014/35/EU. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2014/53/EU, 2014/35/EU. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 2014/53/EU, 2014/35/EU.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European Radio Equipment directives. Equipment: 1T1R 11n Wireless LAN with Bluetooth USB Adapter Model No.: EW-7611ULB V2 The following European standards for essential requirements have been followed: Directives 2014/53/EU Spectrum EMC : EN 300 328 V2.2.2 (2019-07) : EN 301 489-1 V2.2.3 (2019-11) EN 301 489-17 V3.2.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the United Kingdom Radio Equipment directives. Equipment: 1T1R 11n Wireless LAN with Bluetooth USB Adapter Model No.: EW-7611ULB V2 The following European standards for essential requirements have been followed: Radio Equipment Regulations 2017 (S.I. 2017/1206) Spectrum : EN 300 328 V2.2.2 (2019-07) EMC : EN 301 489-1 V2.2.