Datasheet

- -
30
Use Client If the authentication type you use is ‘PEAP’ or ‘TTLS’, you can use the certificate
stored on your computer. If the authentication type you use is ‘TLS/Smart Card’,
this box is always checked.
More.. After you clicked this button, you’ll be prompted to select a certificate on your
computer.
Allow This box is always checked and can not be modified.
unauthenticated
provision mode
Use protected If the authentication type you use is ‘EAP-FAST’
authentication you can use protected authentication credential
credential by check this box.
Remove Remove the credential you imported previously.
Import Import the authentication credential file (PAC or al file format), you’ll be prompted
to select a credential file from your computer.
Protocol You can select the protocol of tunneled authentication here. This pulldown menu
is only available when authentication type you use is ‘PEAP’ or ‘TTLS’. When you
use ‘EAP-FAST’ as authentication type, the protocol setting is always ‘Generic
Token Card’ and can not be changed.
Identity Please input the identity of tunneled authentication
(of tunneled here.
authentication)
Password Please input the password of tunneled authentication
(of tunneled here.
authentication)
Password Mode Please select the password mode of ‘EAP-FAST’ authentication mode. This
setting is hidden when the authentication type is not ‘EAP-FAST’.
After you finish all settings, click ‘OK’ to save settings and exit.