Quick Installation Guide

23
IV-3-2-5. WPS
Wi-Fi Protected Setup is a simple, alternative way to establish connections
between WPS compatible devices. Some wireless network devices feature a
built-in WPS button, which activates WPS on that device. When WPS is
activated in the correct manner and at the correct time for two compatible
devices, they will automatically connect to each other.
WPS can also be activated via a device’s web user interface, which has the
same effect as physically pushing the WPS button (known as PBC or “push
button configuration”).
PIN code WPS is an additional variation of WPS which can be activated from a
device’s web user interface, and includes the use of a PIN code between the
two devices for identification and verification.
The “WPS” page displays information about Wireless Protected Setup (WPS),
including a list of available WPS access points and user-defined WPS “Profiles”.
Instructions to set up PBC WPS and PIN code WPS are included below,
followed by a description of each item on this page:
You can save WPS settings as a profile using the “Export Profile”
button and switch between profiles using the “WPS Profile List”.