Operation Manual

16
C The wireless standard supported by this access point.
‘n’ for 802.11n
, ‘g; for 802.11g , and ‘b’ for 802.11b .
WPS icon
will appear when the access point supports WPS.
If the access point uses encryption, a key icon
will appear.
Note: When the access point supports WPS and WPS icon
is
appeared, you will not see the key icon
here even through
the access point uses encryption.
D Shows the signal strength of access point by percentage.
E Shows the bar graph of the signal strength.
If you can not see the access point you wish to connect here,
please click ‘Rescan’ button to scan for access point again, until
the one you preferred is displayed. You may have to click
‘Rescan’ for more than two times before you can see the access
point you wish to use here.
If you still can not see the access point you wish to use after
clicking ‘Rescan’ for more than five times, please move your
computer closer to the location where the wireless access point
is, or see instructions in Chapter 3-2 ‘Troubleshooting’.
If you wish to see detailed information for a specific access point,
please double-click on it, and you’ll be provided with its detailed
information.