Operation Manual

18
And here are descriptions of every setup item in setup area:
Item Name Description
Sorted by >> You can decide how to sort all listed access
point by ‘SSID’, ‘Channel’, or ‘Signal’ (signal
strength).
Show dBm Check this box to show the signal strength of
access point, instead of percentage.
Rescan Click this button to rescan access points. You
can click this button for several times, if the
access point you wish to use does not show in
the list.
Add to Profile You can store a specific access point to
profile, so you can link to that access point
directly next time, without inputting
authentication key again.
To add an access point to profile, you have to
select an access point from the list first, then
click ‘Add to Profile’ button. Detailed
instructions will be given below.
Connect Connect to a selected access point. You have
to select an access point from the list first and
then click ‘Connect’ to connect to the selected
access point.