Operation Manual

21
4. Please ask the owner of the wireless access point you want to
connect, and input the correct key here and then click ‘OK’. By
checking ‘Show Password’ box, the encryption key you inputted
here will be displayed.
If the value you inputted here is wrong, you will not be able to
connect to this wireless access point.
Authentication type will be selected by the authentication
type of the access point automatically, please don’t change
it.
However, if you’re connecting to an access point uses 802.1x
authentication, you have to check ‘802.1x’ box and input related
information. Instructions for 802.1x authentication will be given
later.
5. If the wireless access point is successfully connected, you’ll see
a
symbol appears in front of the name of wireless device.
You can put the mouse cursor over the Edimax configuration
utility icon, and the brief information about link status and signal
strength of current wireless connection will be shown as a popup
balloon.