Operation Manual

45
In ‘WMM Setup Status’ block, current WMM settings will be
displayed. And here are descriptions of every setup item:
Item Name Description
WMM Enable Check this box to enable WMM function.
Please click ‘Apply’ button on the right of this
check box after you check or uncheck this
box, so corresponding settings in this window
will be activated or deactivated respectively.
WMM - Power
Save Enable
Check this box to enable WMM power saving
mode to save energy, and let your computer’s
battery live longer.
You also have to select WMM power save
modes here:
AC_BE: Best Performance
AC_BK: Worst Performance
AC_VI: Video data has priority
AC_VO: Voice data has priority
Direct Link Setup
Enable
If you have another WMM-enabled wireless
device, you can enter its MAC address here,
then click ‘Apply’ button, and this network card
will establish a direct link to the wireless
device you specified here.
You also have to specify the timeout value of
this directly-linked wireless device. Valid
values are from 1 to 65535 (seconds), and
input ‘0’ for infinity.
If you want to remove a specific wireless
device from direct link table, select the device
and click this button to remove it.