Operation Manual

49
6. You can click ‘Detail’ button to see detailed information of
connected access point. If you wish to save this connection as a
profile, you can click ‘Export Profile’ button, and this connection
will be saved. You can find this connection in ‘Profile’ tab in a
later time.
7. Sometime WPS may fail (In the following picture, WPS pairing is
failed because no WPS-enabled access point is found):
You can click ‘PBC’ button few more times to try again. When an
access point is connected, you can click ‘Disconnect’ to
disconnect your wireless network card from a connected access
point, or select another WPS-enabled wireless access point,
then click ‘Connect’ to establish connection to selected access
point, if there are more than one WPS-enabled access point
found. You can also click ‘Rotate’ button, and next access point
on the list will be selected to establish connection.
If you want to delete a found access point from the list, select it
and click ‘Delete’ button.