Operation Manual

50
2-7-2 WPS Setup - PIN
If the wireless access point you wish to connect supports PIN,
please follow the following instructions to establish connection to it:
1. Right-click the Edimax configuration utility icon located at
lower-right corner of computer desktop and then click ‘Launch
Config Utility’.
2. Click ‘WPS Configuration’ menu, and the following settings will
appear.
3. The PIN code of your wireless network card is an eight-digit
number located at the upper-right position of configuration utility.
Remember it, and input the number to your wireless access
point as the WPS PIN code (Please refer to the user manual of
your wireless access point for instructions about how to do this).
NOTE: If you experienced problem with the pin code provided here,
you can click ‘Renew’ to get a new pin code.