Operation Manual

51
4. Click ‘PIN’ button now, and wait for few seconds to one minute. If
a wireless access point with correct PIN code is found, you’ll be
connected to that access point.
5. You may have to click ‘PIN’ for few more times to try again. If you
still can not connect to access point by this way, please make
sure the PIN code you provided to access point is correct.
There are also some options available for WPS configuration:
WPS associate IE: Check this box to send the association request
with WPS IE during WPS setup. This is optional and you can use
default value if you don’t know what will be affected.
WPS probe IE: Check this box to send the WPS probe request with
WPS IE during WPS setup. This is optional and you can use default
value if you don’t know what will be affected.
Auto: When in PIN mode, wireless access point to be connected
will be selected automatically if this box is checked.