Operation Manual

72
I can not establish
connection with a
certain wireless access
point
1. Click ‘Connect’ for few more times.
2. If the SSID of access point you wish
to connect is hidden (nothing
displayed in ‘SSID’ field in ‘Site
Survey’ function), you have to input
correct SSID of the access point you
wish to connect. Please contact the
owner of access point to ask for
correct SSID.
3. You have to input correct security key
to connect an access point with
encryption. Please contact the
owner of access point to ask for
correct security key.
4. The access point you wish to connect
only allows network cards with
specific MAC address to establish
connection. Please go to ‘About’ tab
and write the value of ‘Phy_Addess’
down, then present this value to the
owner of access point so he / she
can add the MAC address of your
network card to his / her access
point’s list.
The network is slow /
having problem when
transferring large files
1. Move closer to the place where
access point is located.
2. Disable ‘Tx Burst’ in ‘Advanced’ tab.
3. Enable ‘WMM’ in ‘QoS’ tab if you
need to use multimedia / telephony
related applications.
4. Disable ‘WMM – Power Save Enable’
in ‘QoS’ tab.
5. There could be too much people
using the same radio channel. Ask
the owner of the access point to
change the channel number.
Please try one or more solutions listed
above.