User manual

30
Apply
Apply changes to the wireless USB adapter.
Set Default
Reset the settings back to their default, unchanged
values.
VI-3-5. WPS
The WPS page displays information relating to Wireless Protected Setup
(WPS). All available access points along with their respective BSSID, security
information and channel numbers are listed.
The adapter’s WPS PIN code is displayed next to “PIN:”. The PIN code is a
security feature and you will need to enter it into your access point/router’s
WPS configuration screen to complete PIN code WPS.
Scan
Refresh the list of available wireless networks.
PIN
Activate PIN code WPS on the wireless extender for
two minutes.
PBC
Activate Push Button Configuration (PBC) WPS on the
wireless extender for two minutes.
Activate WPS on your access point/router (and enter the PIN code
if required) within two minutes of activating WPS on the wireless
extender.