Wi-Fi USB Adapter Quick Installation Guide 08-2022 / V2.
I. Windows Plug-and-Play Installation Insert I-1. Plug-and-Play Connect Insert the USB Adapter Insert the USB adapter into your computer. I-2. Plug-and-Play 1. The Wi-Fi icon will be displayed on the right-bottom Windows taskbar if the Plug-and-Play is supported. (Refer to III. FAQ -> Q1) 2. Click the Wi-Fi icon to connect to the Wi-Fi network. The Wi-Fi icon might be different depending on your OS version. I-3.
II. Windows Driver Installation Insert II-1. Download & Install Driver Connect Insert the USB Adapter Insert the USB adapter into your computer. II-2. Download & Install the Driver 1. Please access the link below. Search the model name in the search box and download the driver. https://www.edimax.com/download 2. Unzip the downloaded file and run the setup.exe. Follow the instructions to complete the driver installation.
II-3. Connect to the Wi-Fi Network 1. Click the Wi-Fi icon on the windows taskbar to connect to the Wi-Fi network. The Wi-Fi icon might be different depending on your OS versions. (Refer to III. FAQ -> Q2) 2. Select your Wi-Fi network (SSID), connect and enter the password if it is required.
III. Frequently Asked Question (FAQ) Q1. Why the Wi-Fi icon doesn’t display on the Windows taskbar? A. Your computer doesn’t support Plug-and-Play for this device. Please go to section II-2, to download and install the driver and try again. Q2. After the driver installed, why the Wi-Fi icon doesn’t display on the Windows taskbar? A. For Windows 7, please right-click “Date and Time” at the taskbar, and select “Properties”. Find the system item “Network”, set the behaviors as “On”.
V. Safety Instructions The following general safety guidelines are provided to help ensure your own personal safety and protect your product from potential damage. Remember to consult the product user instructions for more details. This product is designed for indoor use only. Static electricity can be harmful to electronic components. Discharge static electricity from your body (i.e. touching grounded bare metal) before touching the product. The device contains no user serviceable parts.
COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
RED Compliance Statement Compliance with 2014/53/EU Radio Equipment Directive (RED) In accordance with Article 10.8(a) and 10.8(b) of the RED, the following table provides information on the frequency bands used and the maximum RF transmit power of the product for sale in the EU: P/N EW-7822UMX EW-7811ULC Frequency range (MHz) Max. Transmit Power (dBm) 2412 - 2472 19.15 5180 - 5240 19.56 5260 - 5320 19.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, 2014/35/EU. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2014/53/EU, 2014/35/EU. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 2014/53/EU, 2014/35/EU.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European Radio Equipment directives. Equipment: AX1800 Dual-Band USB 3.0 Adapter Model No.: EW-7822UMX The following European standards for essential requirements have been followed: Directives 2014/53/EU Spectrum : EN 300 328 V2.2.2 (2019-07) EN 301 893 V2.1.1 (2017-05) EMC : EN 301 489-1 V2.2.3 (2019-11) EN 301 489-17 V3.2.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the United Kingdom Radio Equipment directives. Equipment: AX1800 Dual-Band USB 3.0 Adapter Model No.: EW-7822UMX The following European standards for essential requirements have been followed: Radio Equipment Regulations 2017 (S.I. 2017/1206) Spectrum : EN 300 328 V2.2.2 (2019-07) EN 301 893 V2.1.1 (2017-05) EMC : EN 301 489-1 V2.2.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European Radio Equipment directives. Equipment: AC600 Dual-Band Nano USB Adapter Model No.: EW-7811ULC The following European standards for essential requirements have been followed: Directives 2014/53/EU Spectrum : EN 300 328 V2.2.2 (2019-07) EN 301 893 V2.1.1 (2017-05) EMC : EN 301 489-1 V2.2.3 (2019-11) EN 301 489-17 V3.2.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the United Kingdom Radio Equipment directives. Equipment: AC600 Dual-Band Nano USB Adapter Model No.: EW-7811ULC The following European standards for essential requirements have been followed: Radio Equipment Regulations 2017 (S.I. 2017/1206) Spectrum : EN 300 328 V2.2.2 (2019-07) EN 301 893 V2.1.1 (2017-05) EMC : EN 301 489-1 V2.2.
