Quick Installation Guide EW-7822UAD 11ac 2T2R Wireless Dual-Band USB Adapter
I. Product Information .............................................................................. 2 I-1. I-2. I-3. I-4. Package Contents ..................................................................................................................2 LED Status ..............................................................................................................................2 System Requirements ...............................................................................................
I. Product Information I-1. Package Contents CD EW-7822UAD I-2. LED Status LED WLAN LED Status On Off Description Wireless activity: transmitting or receiving data. No wireless activity. EW-7822UAD I-3. System Requirements - Windows 7/8/10 ~, Mac OS X 10.7~, Linux USB 3.
I-4. Safety In order to ensure the safe operation of the device and its users, please read and act in accordance with the following safety instructions. 1. The wireless adapter is designed for indoor use only; do not place the wireless adapter outdoors. 2. Do not place the wireless adapter in or near hot/humid places, such as a kitchen or bathroom. 3. The wireless adapter contains small parts which are a danger to small children under 3 years old.
II. Installation 1. Switch on your computer and insert the USB adapter into an available USB port of your computer. Never use force to insert the USB adapter. 2. Insert the included CD-ROM into the CD drive of your computer. The setup wizard is also available for download from the Edimax website. 3. For Windows users the setup wizard will open. For Mac users the CD’s “Mac” folder will open.
III. Windows III-1. Driver Installation 1. Click Setup to continue. 2. Click “Next” to continue and please wait while the driver is installing. 3. You need to restart your computer before using the wireless adapter. Choose whether to restart your computer now or later, and click “Finish”.
4. Please disable any other wireless adapters as described in V. Disabling Network Adapters. Then, Windows users can connect to an available Wi-Fi network as usual. For guidance on doing so, please refer to VI. Using The Adapter. III-2. Driver Uninstallation To uninstall drivers for your adapter, use the Windows Control Panel built-in Programs and Features, Uninstall a Program or Add or Remove Programs feature. An example is shown below: III-2-1. Windows 7, 8.1 & 10 1.
IV. Disabling Network Adapters To ensure that your USB wireless adapter can function correctly, it is recommended that you disable any other existing wireless network adapters installed on your computer. If you are unsure how to do so, you can refer to the user manual for your computer, or follow the guidance below. V-1. Windows 7 Go to Start > Control Panel. Click View network status and tasks > Wireless Network Connection and click Disable.
V-2. Windows 8.1 & 10 1. Go to File Explorer > Network (right click) > Properties > Change adapter settings. 2. Right click your wireless adapter, select “Properties” and then “Disable”.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
RED Compliance Statement Compliance with 2014/53/EU Radio Equipment Directive (RED) In accordance with Article 10.8(a) and 10.8(b) of the RED, the following table provides information on the frequency bands used and the maximum RF transmit power of the product for sale in the EU: Frequency range (MHz) Max. Transmit Power (dBm) 2412-2472 19.85 5180-5240 21.52 A simplified DoC shall be provided as follows: Article 10(9) Hereby, Edimax Technology Co., Ltd.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, 2014/35/EU. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2014/53/EU, 2014/35/EU. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 2014/53/EU, 2014/35/EU.