Quick Installation Guide

VI. Disabling Network Adapters

To ensure that your USB wireless adapter can function correctly, it is

recommended that you disable any other existing wireless network adapters

installed on your computer.

VII. WPS Setup

If your wireless router/access point supports Wi-Fi Protected Setup (WPS)

then you can use this method to connect to a Wi-Fi network.

1. Press the WPS button on your router/access point to activate WPS.

Please check the instructions for your wireless router/access

point for how long you need to hold down its WPS button to

activate WPS.

2. Within two minutes, press the WPS button on the underside of the

EW-7822UAD to activate its WPS.

3. The devices will establish a connection.