User manual

VI-4. WPS Setup

If your wireless router/access point supports Wi-Fi Protected Setup (WPS)

then you can use this method to connect to a Wi-Fi network.

1. Press the WPS button (often the WPS/Reset

button) on your router/access point to activate

WPS.

Please check the instructions for your wireless

router/access point for how long you need to

hold down its WPS button to activate WPS.

2. Within two minutes, press the WPS button on

the underside of the EW-7833UAC to activate

its WPS.

3. The devices will establish a connection.

WPS Button