Datasheet

SPECIFICATIONS
Copyright © 2015 Edimax Technology Co. Ltd. All rights reserved.
GP-101ST
IEEE 802.3at Gigabit PoE+ Splitter with Adjustable 5V DC, 9V DC, 12V DC Output
Hardware
Ports
1 Port RJ-45 10/100/1000Base-T PoE Input Port
1 Port RJ-45 10/100/1000Base-T Output Port
1 Port DC Jack Output Port
LED Indicators
5V/9V/12V, Power and AC
Power Input
IEEE 802.3af, IEEE 802.3at
Power Output
DC Out Adjustable Slide Switch for Either 5V/2A, 9V/2A or12V/2A DC Output Power
Y-Cable DC Pin (ODxIDxL) : 5.5 x 2.1 x 9.5 mm and 3.5 x 1.35 x 11 mm
Pin Assignment
1/2(+), 3/6(-) End-Span (mode A) or 4/5(+), 7/8(-) Mids-Span (Mode B)
Dimensions (L x W x H)
63 × 64 × 23 mm
Weight
65g
Environment
Temperature
Operating: 0 ~ 40
Storage: -40 ~ 70
Humidity (Non-condensing)
Operating: 10 ~ 90%
Storage: 5 ~ 90%
Standards Compliance
Standards
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3af Power Over Ethernet (PoE)
IEEE 802.3at Power Over Ethernet Plus (PoE+)
Certifications
FCC, CE
HARDWARE INTERFACE
Maximum performance and actual data rates will vary depending on network conditions and environmental factors. Product specifications and design are subject to change without notice.
Copyright © 2016 Edimax Technology Co. Ltd. All rights reserved.
www.edimax.com
Edimax Technology Co., Ltd
No. 278, Xinhu 1st Rd., Neihu Dist.,
Taipei City, Taiwan
Email: sales@edimax.com.tw
Edimax Technology Europe B.V.
Fijenhof 2, 5652 AE Eindhoven,
The Netherlands
Email: sales@edimax.nl
Edimax Computer Company
3350 Scott Blvd., Bldg.15 Santa Clara,
CA 95054, USA
Email : sales@edimax.com
APPLICATION DIAGRAM
Data Out
Gigabit Ethernet Port
DC Out
DC Out Slide Switch
5V/9V/12V
Power + Data In
Gigabit Ethernet Port
Data
Power
Data + Power (PoE)
PoE Switch
PoE Switch
Power Data
+
Data
Power
GP-101ST
PoE+ Splitter
Non-PoE
Ethernet-Enabled
Device
PoE Injector
Non-PoE Switch
Power Data
+
Data
Power
PoE Injector
Data
GP-101ST
PoE Splitter
Non-PoE
Ethernet-Enabled
Device
Power
DC Pin
5.5 x 2.1 x 9.5 mm
DC Pin
3.5 x 1.35 x 11 mm