GP-101ST Quick Installation Guide 01-2021 / v2.
I. Product Information I-1. Package Contents GP-101ST PoE Splitter I-2.
Code Name Hardware Overview A DATA OUT B DC OUT C PWR+DATA IN D DC OUT Switch Indication / Function Supports 10/100/1000 base Ethernet. Connect to the Ethernet device with standard Ethernet cable to transmit data. Connect to the power port of the Ethernet device with the provided power cable to supply the power of 5V, 9V,or 12V. Supports 10/100/1000 PoE over Ethernet. Connect to the PSE or PoE Injector with a standard Ethernet cable.
I-3. Connections Connect the splitter as shown below: Use a standard Ethernet cable to connect a PoE port of the PSE (e.g. PoE Switch) to the POWER+DATA IN port. Choose the appropriate DC output by the Power-mode switch, Please make sure that the output is correct, a different voltage may destroy the device. Connect the LAN OUT port to the Ethernet device with standard Ethernet cable for data transmitting.
COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/30/EU. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2014/30/EU. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 2014/30/EU. Polski: Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi warunkami określonymi Dyrektywą UE 2014/30/EU.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directives. Equipment: 1-port Giga Ethernet PoE Splitter Model No.
