GP-102IT IEEE 802.3bt Gigabit PoE++ Injector Quick Installation Guide 02-2022/ v1.
Contents I.Product Information ........................................... 1 I-1. Package Contents ............................................................................. 2 I-2. System Requirements ....................................................................... 2 I-3. Hardware Overview .......................................................................... 3 I-4. LED Status ........................................................................................ 4 II.Hardware Installation .
I. Product Information The Edimax PoE Injector GP-102IT comply with IEEE 802.3af/at/bt standard and provides both power and data to any IEEE 802.3af/at/bt compliant devices. Users can easily set up a reliable wired network in your home or office. You can find all supporting documents from the link below or via QR Code: https://www.edimax.com/download (Once you’ve visited the Edimax official website, please enter the model no. “GP-102IT” into the search box to search for your product.
I-1. Package Contents Before start using this product, please check if there is anything missing in the package, and contact your dealer to claim the missing item(s): PoE Injector Power Cord Screws I-2. System Requirements - Support 10/100/1000M BASE-T RJ45 port - Support IEEE802.
I-3. Hardware Overview 1 2 3 No.
I-4.
II. Hardware Installation This section will guide you through the steps to set up the GP-102IT PoE injector. To connect a PoE Injector, please follow the steps below, 1. Plug injector power cord into a wall outlet. 2. Plug an Ethernet cable from the DATA Output port to the router or switch. 3. Plug an Ethernet cable from the PoE/DATA Input port to the device or any devices that base unit Ethernet port.
COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/30/EU. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2014/30/EU. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 2014/30/EU. Polski: Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi warunkami określonymi Dyrektywą UE 2014/30/EU.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directives. Equipment: 1-port Giga Ethernet 60W PoE Injector Model No.
