Datasheet

www.edimax.com
Long Range8-Port Gigabit Switch with 4 PoE+ Ports & DIP Switch
GS-1008PH V2
Hardware QoS for Video & Voice Traffic
Priority
Supports 802.1p QoS via DIP switch port 4. This
ensures first priority for video and voice traffic.
2
High Priority
Media Streaming
VoIP
Web Browsing
Email & Downloading
Data Transfer
Low Priority
Power and Data Distance Extension
The built-in DIP switch provides extended operation modes on switch 1 & 2. The GS-1008PH V2 operates as a
“standard” IEEE 802.at/af PoE Switch when DIP switches are off. With switches on, the GS-1008PH V2 operates
on a per-port basis at 10Mbps duplex operation but can support 30-watt PoE power output over a distance of
up to 200 meters, overcoming the 100m limit on Ethernet UTP cables. With this brand-new feature, the GS-
1008PH V2 provides an additional solution for 802.3at/af PoE distance extension and saves costs of Ethernet
cable installation.
DIP Switch Status Description
1
PoE Extend
On
PoE Ports 1 – 2 Power + Data extend
Off
As a normal PoE switch
2
PoE Extend
On
PoE Ports 3 – 4 Power + Data extend
Off
As a normal PoE switch
3
VLAN
On
Ports 1 – 4 VLAN enabled
Off
Ports 1 – 4 VLAN disabled
4
QoS
On
QoS (Video & Voice Traffic High Priority) enabled
Off
QoS disabled
DIP Switch
1. PoE Extend
2. PoE Extend
3. VLAN
4. QoS
Innovative Port-based VLAN features
The GS-1008PH V2 features port-based
VLAN where ports can be isolated from each
other via DIP switch port 3. This can help to
prevent IP camera’s multicast or broadcast
storms from affecting each other.