Datasheet

The GS-1026 V2 is 24-port gigabit with 2 SFP slots rack-mount switch, that is designed for medium or large
network environment to strengthen its network connection. Including rack-mount brackets, the 19" size switch
fits into your rack cabinet. It is a superb choice to boost your network with higher performance and efficiency.
Built-in 2 SFP slots
The GS-1026 V2 is built in with 2 SFP slots to uplink to the server, storage, or other switch. You can make the
connection by plugging in standard SFP fiber modules for long distance applications.
Supports High-Speed Networking and Jumbo Frames
The GS-1026 V2 is an excellent solution to expand your Gigabit network. With Gigabit speed, the GS-1026 V2
gives high flexibility and high bandwidth connectivity to servers, workstations and other attached devices. It
enables you to save time when transferring large files. In addition, it also supports Jumbo Frames 9K to improve
network utilization in large files transfer.
Plug & Play, No Installation Required
Just plug Ethernet enabled devices into the switch. Data can be transmitted through existing standard Cat-5e
Ethernet cables with no additional cables or configuration required.
High Performance
The GS-1026 V2 switch also supports auto-negotiation, non-blocking wire speed, auto-MDI/MDI-X and store and
forward architecture to give you the maximum speed and highest performance possible for each device
connected to your network.
•Auto-Negotiation
Each of the GS-1026 V2 ’s ports automatically detect whether connected network devices are running at
10Mbps or 100Mbps and half-duplex or full-duplex mode, and adjusts the speed and mode accordingly ensuring
easy and hassle-free operation.
•Non-Blocking Wire Speed
Forwards and receives traffic seamlessly – each port supports speeds up to 200Mbps in full-duplex mode
simultaneously, providing full wire speed to connected devices and allowing you to run a high speed network
smoothly.
•Supports Auto-MDI/MDI-X
Every port of the GS-1026 V2 can automatically detect the type of cables. There is no need to choose crossover
or parallel cables when you are connecting this switch to another switch or to a computer.
•Supports Store and Forward Architecture
With the store and forward architecture filters fragment & CRC error packets, the GS-1026 V2 can maximize
network performance while minimizing the propagation of bad network packets.
24-Port Gigabit with 2 SFP Slot Rack-Mount Switch
GS-1026 V2
Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors. Product specifications and design are subject to change without notice.
Copyright © 2016 Edimax Technology Co. Ltd. All rights reserved.
www.edimax.com