GS-1026 Quick Installation Guide 01-2016 / v2.
Product Information Package Contents Before you start using this switch, please check if there is anything missing in the package, and contact your dealer to claim the missing item(s): GS-1026 Switch Quick Installation Guide Power Cord Rubber Feet and Rack Mount Kits GS-1026 Key Features Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab and IEEE 802.
LED Definition: LED Light Status Power On Off On LNK/ACT Off Flashing Description Switch on and correctly powered Switch not powered or not correctly powered The port connected The port not connected The port is activating and transferring /receiving data. Rear Panel AC AC IN : This connects to AC power source. Supported input voltages range from 100 ~ 240V AC at 50 ~ 60Hz. Power Connector Plug in the female connector of the provided power cord into this connector, and the male into a power outlet.
PRODUCT INSTALLATION In the following there are two ways for your installation. You can select one that suits you. Desktop Installation 1. Install the switch on a level surface that can support the weight of the unit & the relevant components, and attach the rubber feet to the bottom. The rubber feet cushion the switch and helps protect the case from scratches. 2. Plug the switch to electrical source with the provided power cord.
COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1995/5/EC, 2009/125/EC, 2006/95/EC, 2011/65/EC. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 1995/5/CE, 2009/125/CE, 2006/95/CE, 2011/65/CE. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 1995/5/ES, 2009/125/ES, 2006/95/ES, 2011/65/ES.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directives. Equipment: GS-1026 V2 Switch Model No.: GS-1026 V2 24-port Gigabit with 2 SFP slots Rack-mount The following European standards for essential requirements have been followed: Electromagnetic directive 2004/108/EC EMC : EN55022:2010 Class A CISPR 22: 2008 (Ed 6.
