User Manual

114
Figure 99 - Security > RADIUS > Add/Edit RADIUS Server
Item
Description
Address Type
In add dialog, user need to specify server Address Type
 Hostname: Use domain name as server address.
 IPv4: Use IPv4 as server address.
 IPv6: Use IPv6 as server address.
Server Address
In add dialog, user need to input server address based on
address type. In edit dialog, it shows current edit server address.
Server Port
Set RADIUS server port.
Priority
Set RADIUS server priority (smaller value has higher priority).
RADIUS session will try to establish with the server setting which
has highest priority. If failed, it will try to connect to the server
with next higher priority.
Retry
Set RADIUS server retry value. If it is fail to connect to server, it
will keep trying until timeout with retry times.
Timeout
Set RADIUS server timeout value. If it is fail to connect to server,
it will keep trying until timeout.
Usage
Set RADIUS server usage type
 Login: For login authentifation.
 802.1x: For 802.1x authentication.
 All: For all types.