User Manual

129
Max Hosts
In Multiple Authentication mode, total host number cannot not
exceed max hosts number.
Common Timer
Reauthentication
After re-authenticate period, host will return to initial state and need
to pass authentication procedure again.
Inactive
If no packet from the authenticated host, the inactive timer will
increase. After inactive timeout, the host will be unauthorized and
corresponding session will be deleted. In multi-host mode, the packet
is counting on the authorized host only and not all packets on the port.
Quiet
When port is in Locked state after authenticating fail several times, the
host will be locked in quiet period. After this quiet period, the host is
allowed to authenticate again.
802.1X Params
TX Period
Number of seconds that the device waits for a response to an
Extensible Authentication Protocol (EAP) request/identity frame from
the supplicant (client) before resending the request.
Supplicant
Timeout
The maximum number of EAP requests that can be sent. If a response
is not received after the defined period (supplicant timeout), the
authentication process is restarted.
Server Timeout
Number of seconds that lapses before EAP requests are resent to the
supplicant.
Max Request
Number of seconds that lapses before the device resends a request to
the authentication server.
Web-Based Param
Max Login
Set checkbox to set max login number to be infinite or specify max
login number.
IV-10-3-3 Sessions
This page show all detail information of authentication sessions and allow user to select
specific session to delete by clicking “Clear ” button.
To display Sessions web page, click Security > Authentication Manger > Sessions.
Figure 108 - Security > Authentication Manager > Sessions