User Manual

169
Item
Description
Queue
Queue ID to configure.
Strict Priority
Set queue to strict priority type.
WRR
Set queue to Weight round robin type.
Weight
If the queue type is WRR, set the queue weight for the queue.
WRR Bandwidth
Percentage of WRR queue bandwidth.
IV-12-1-3 CoS Mapping
The CoS to Queue table determines the egress queues of the incoming packets based on
the 802.1p priority in their VLAN tags. For incoming untagged packets, the 802.1p priority
will be the default CoS/802.1p priority assigned to the ingress ports. Use the Queues to
CoS table to remark the CoS/802.1p priority for egress traffic from each queue.
To display CoS Mapping web page, click QoS > General > CoS Mapping.
Figure 140 - QoS > General > Cos Mapping