User Manual

175
IV-13 Diagnostics
Use the Diagnostics pages to configure settings for the switch diagnostics feature or
operating diagnostic utilities.
IV-13-1 Logging
IV-13-1-1 Property
To enable/disable the logging service, click Diagnostic > Logging > Property.
Figure 144 - Diagnostics > Logging > Property
Item
Description
State
Enable/Disable the global logging services. When the logging service is
enabled, logging configuration of each destination rule can be
individually configured. If the logging service is disabled, no messages
will be sent to these destinations.
Console Logging
State
Enable/Disable the console logging service
Minimum Severity
The minimum severity for the console logging.
RAM Logging
State
Enable/Disable the RAM logging service.
Minimum Severity
The minimum severity for the RAM logging.
Flash Logging