User Manual

199
 SNMPv2: Community-based SNMP Version 2.
 SNMPv3: User security model SNMP version 3.
Security Level
Specify SNMP security level
 No Security : Specify that no packet authentication is performed.
 Authentication: Specify that no packet authentication without
encryption is performed.
 Authentication and Privacy: Specify that no packet authentication
with encryption is performed.
View
Read
Select read view name if Read is checked.
Write
Select write view name, if Write is checked.
Notify
Select notify view name, if Notify is checked.
IV-14-4-3 Community
To configure and display the SNMP community settings, click Management > SNMP >
Community.
Figure 171 - Management > SNMP > Community
Item
Description
Community
The SNMP community name. Its maximum length is 20 characters.
Group
Specify the SNMP group configured by the command snmp group to
define the object available to the community.
View
Specify the SNMP view to define the object available to the
community.
Access
SNMP access mode
 Read-Only: Read only.
 Read-Write: Read and write.