User Manual

30
Item
Description
Source
Select the time source.
 SNTP: Time sync from NTP server.
 From Computer: Time set from browser host.
 Manual Time: Time set by manually configure.
Time Zone
Select a time zone difference from listing district.
SNTP
Address Type
Select the address type of NTP server. This is enabled when time
source is SNTP.
Server Address
Input IPv4 address or hostname for NTP server. This is enabled
when time source is SNTP.
Server Port
Input NTP port for NTP server. Default is 123. This is enabled
when time source is SNTP.
Manual Time
Date
Input manual date. This is enabled when time source is manual.
Time
Input manual time. This is enabled when time source is manual.
Daylight Saving Time
Type
Select the mode of daylight saving time.
 Disable: Disable daylight saving time.
 Recurring: Using recurring mode of daylight saving time.
 Non-Recurring: Using non-recurring mode of daylight saving
time.
 USA: Using daylight saving time in the United States that
starts on the second Sunday of March and ends on the first
Sunday of November.
 European: Using daylight saving time in the Europe that
starts on the last Sunday in March and ending on the last
Sunday in October.
Offset
Specify the adjust offset of daylight saving time.
Recurring From
Specify the starting time of recurring daylight saving time. This
field available when selecting “Recurring” mode.
Recurring To
Specify the ending time of recurring daylight saving time. This
field available when selecting “Recurring” mode.
Non-recurring From
Specify the starting time of non-recurring daylight saving time.
This field available when selecting “Non-Recurring” mode.
Non-recurring To
Specify the ending time of recurring daylight saving time. This
field available when selecting “Non-Recurring” mode.
Non-recurring From
Specify the starting time of non-recurring daylight saving time.
This field available when selecting “Non-Recurring” mode.
Non recurring To
Specify the ending time of recurring daylight saving time. This
field available when selecting “Non-Recurring” mode.