User Manual

36
ARP rate limit
Enabled to auto shutdown port when ARP rate limit reason occur.
This reason caused by DHCP packet rate exceed ARP rate limit.
IV-3-4 Link Aggregation
IV-3-4-1 Group
This page allows user to configure link aggregation group load balance algorithm and
group member.
To view the Group menu, navigate to Port > Link Aggregation > Group.
Figure 29 - Port > Link Aggregation > Group
Item
Description
Load Balance
Algorithm
LAG load balance distribution algorithm
 src-dst-mac: Based on MAC address.
 src-dst-mac-ip: Based on MAC address and IP address.
LAG
LAG Name.
Name
LAG port description.
Type
The type of the LAG
 Static: The group of ports assigned to a static LAG are always
active members.
 LACP: The group of ports assigned to dynamic LAG are
candidate ports. LACP determines which candidate ports are
active member ports.
Link Status
LAG port link status