User Manual

61
Item
Description
State
Set checkbox to enable or disable voice VLAN function.
VLAN
Select Voice VLAN ID. Voice VLAN ID cannot be default VLAN.
Cos/802.1p
Select a value of VPT. Qualified packets will use this VPT value as inner
priority.
Remarking
Set checkbox to enable or disable 1p remarking. If enabled, qualified
packets will be remark by this value.
Aging Time
Input value of aging time. Default is 1440 minutes. A voice VLAN entry will
be age out after this time if without any packet pass through.
Port Setting Table
Port
Display port entry.
State
Display enable/disabled status of interface.
Mode
Display voice VLAN mode.
QoS Policy
Display voice VLAN remark will effect which kind of packet.
Click “Edit” button to view Edit Port Setting menu.
Figure 54 - VLAN > Voice VLAN > Property > Edit Port Setting
Item
Description
Port
Display selected port to be edited.
State
Set checkbox to enable/disabled voice VLAN function of interface.
Mode
Select port voice VLAN mode
 Auto: Voice VLAN auto detect packets that match OUI table and add
received port into voice VLAN ID tagged member.
 Manual: User need add interface to VLAN ID tagged member
manually.
QoS Policy
Select port QoS Policy mode
 Voice Packet: QoS attributes are applied to packets with OUIs in the
source MAC address.
 All: QoS attributes are applied to packets that are classified to Voice
VLAN.