User Manual

179
III-12-2. Rate Limit
Use the Rate Limit pages to define values that determine how much traffic the switch can
receive and send on specific port or queue.
III-12-2-1. Ingress/Egress Port
This page allow user to configure ingress port rate limit and egress port rate limit. The
ingress rate limit is the number of bits per second that can be received from the ingress
interface. Excess bandwidth above this limit is discarded.
To display Ingress / Egress Port web page, click QoS > Rate Limit > Ingress / Egress Port.
Figure 137 - QoS > Rate Limit > Ingress / Egress Port
Item
Description
Port
Port name.
Ingress (State)
Port ingress rate limit state
 Enabled: Ingress rate limit is enabled
 Disabled: Ingress rate limit is disabled
Ingress (Rate)
Port ingress rate limit value if ingress rate state is enabled.
IP Precedence
IP Precedence value which queue is mapped.
Egress (State)
Port egress rate limit state
 Enabled: Egress rate limit is enabled
 Disabled: Egress rate limit is disabled
Egress (Rate)
Port egress rate limit value if egress rate state is enabled.