User Manual

30
Self Loop
Enabled to auto shutdown port when Self Loop reason occur.
Broadcast Flood
Enabled to auto shutdown port when Broadcast Flood reason occur.
This reason caused by broadcast rate exceed broadcast storm control
rate.
Unknown Multicast
Flood
Enabled to auto shutdown port when Unknown Multicast Flood
reason occur. This reason caused by unknown multicast rate exceed
unknown multicast storm control rate.
Unicast Flood
Enabled to auto shutdown port when Unicast Flood reason occur.
This reason caused by unicast rate exceed unicast storm control rate.
ACL
Enabled to auto shutdown port when ACL shutdown port reason
occur. This reason caused packet match the ACL shutdown port
action.
Port Security
Enabled to auto shutdown port when Port Security Violation reason
occur. This reason caused by violation port security rules.
DHCP rate limit
Enabled to auto shutdown port when DHCP rate limit reason occur.
This reason caused by DHCP packet rate exceed DHCP rate limit.
ARP rate limit
Enabled to auto shutdown port when ARP rate limit reason occur.
This reason caused by DHCP packet rate exceed ARP rate limit.
III-3-3. Link Aggregation
III-3-3-1. Group
This page allow user to configure link aggregation group load balance algorithm and
group member.
To view the Group menu, navigate to Port > Link Aggregation > Group.