HP-5101 Quick Installation Guide 05-2012 / v1.
COPYRIGHT Copyright © Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
PRODUCT INTRODUCTION Package Contents Before you start using this product, please check if there is anything missing in the package, and contact your dealer to claim the missing item(s): HP‐5101 z Powerline adapter x 1 z Quick installation guide x 1 z CD with setup wizard, user manual & multi‐language QIG x 1 z Ethernet cable x 1 HP‐5101K z Powerline adapter x 2 z Quick installation guide x 1 z CD with setup wizard, user manual & multi‐language QIG x 1 z Ethernet cable x 2 Note z You can manage the powerlin
LED & Button Definitions LED LAN PLC PWR Status Green Blinking Off Description LAN port connected LAN activity (transferring data) LAN port not connected The green indicator turns on and the red indicator turns blinks slowly when the device is detecting a powerline link. Green/Red The green indicator turns on and the red indicator turns blinks quickly to indicate data is being transferred over the powerline link.
GETTING STARTED 1. Connect a powerline adapter to your router via Ethernet cable, and then plug it into a power socket. 2. Connect another powerline adapter to your computer, and then plug it into a power socket. 3. Make sure that the PLC and LAN LEDs light up on both PLC adapters. 4. The computer and the router will be connected to the powerline network automatically.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Declaration of Conformity English: French: Czechian: Polish: Romanian: Russian: Magyar: Türkçe: Ukrainian: Slovakian: German: Spanish: Italian: Dutch: Portugese: Norwegian: Swedish: Danish: Finnish: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC, 2009/125/EC.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European EMC directive (2004/108/EC). Equipment: Model No.
8