User manual

17

5.2PrivacyTab

Inthe“Privacy”tab,youcancreateaprivatenetworkbychangingthedefaultnetwork
name.



Thefollowingaredescriptionsofeverysetupitems:

Item Descriptions
PrivateNetworkName Almostallofthepowerlineadaptersshippedwiththesame
networkname“HomePlugAV”.Withthesamenetwork
name,allthepowerlineadapterscanbeconnected
directly.

Ifyouwanttocreateprivatenetwork,pleaseenterthenew
networknameandthenclick“SetLocalDeviceOnly”or
“Set
AllDevices”button.
UseDefault(Public
Network)
Clickthisbuttonandtheinthe“PrivateNetworkName”
columnwillbeshownthedefaultname“HomePlugAV”.
SetLocalDeviceOnly Thisbuttonisusedtochangethenetworknameofthe
localdeviceonly.Onceyouhavechangedthenetwork
nameofthelocaladapteronly,theadaptersseenonthe
“Main”tabpriortothiswillbenolongerpresentinthe
network.
SetAllDevices Thisbuttonisusedtochangethenetworknameofall