User manual

21

Chapter6:PowerlineNetworkManagementwithGroupButton

Thissectiondemonstrateshowtoaddorremovedevicesfromapowerlinenetwork
withthe“Group/Reset”button.

6.1FormingaHomePlugAVLogicalNetwork

Whentwodeviceswithdifferentgroupkeysareconnectedtothesamepowerlineand
youwantthem
toformalogicalnetwork,followthefollowingprocedures:

Step1 Pressandholdthe“Group/Reset”buttononadapterAforlessthan3seconds.The
PowerLEDwillstarttoblink.

Step2 Within120secondsafterthePowerLEDstartsblinkingonadapterA,pressthe
“Group/Reset”buttonon
adapterBforlessthan3seconds.

Step3 Waitfortheconnectiontobeestablished.


