User manual

22

6.2JoiningaNetwork

Ifyouwanttoaddanewpowerlineadaptertoanexistingnetwork,followthe
followingprocedures:

Step1 Pressthe“Group/Reset”buttononanadapterintheexistingnetwork(adapterA
orB)forlessthan3seconds.ThePowerLEDwillstarttoblink.

Step2 Within120secondsafterthePowerLEDstartsblinkingonadapterAorB,press
the“Group/Reset”buttononthenewadapter(adapterC)foratleast3seconds.

Step3 Waitfortheconnectiontobeestablished.


