User manual

23

6.3LeavingaNetwork&JoininganotherNetwork

Ifyouwanttoremoveapowerlineadapterfromanexistingnetworkandadditto
anothernetwork,followthefollowingprocedures:

Step1 Pressthe“Group/Reset”buttonontheadaptertoberemoved(adapterB)for5~8
seconds.

Step2 Wait
foradapterBtobedisconnectedwithadapterA&C.

Step3 Pressthe“Group/Reset”buttononanadapterinanothernetwork(adapterD)for
lessthan3seconds.ThePowerLEDwillstarttoblink.

Step4 Within120secondsafterthePowerLEDstartsblinkingonadapterD,
pressthe
“Group/Reset”buttononadapterBforatleast3seconds.

Step5 Waitfortheconnectiontobeestablished.


