HP-6101AC/ HP-6101ACK/ HP-6101ACP Quick Installation Guide 08-2019 / v1.
Contents I. Product Introduction ...........................................1 I-1. Package Contents ............................................................................ 1 I-2. LED Status ........................................................................................ 2 I-3. Hardware Interface ......................................................................... 3 II. Installation ..........................................................4 II-1. Hardware Installation ..............
I. Product Introduction Thanks for purchasing the AV600 PowerLine Adapter with Integrated Power Socket. This versatile adapter allows you to connect to any standard power socket worldwide quickly and easily via your existing household electrical wiring, without the need for complex configuration or additional cabling. Please follow the instructions below to complete the setup. I-1.
I-2.
I-3. Hardware Interface Integrated Power Socket Pair/Reset Button Ethernet Port Interface Integrated Power Socket Ethernet Port PAIR/RST Description The integrated electrical socket enables additional terminal devices or multiple socket to be connected to the adapter, just as a normal wall socket would. This is a Fast Ethernet port (10/100Mbps) for connecting to a computer or other network device with a network cable.
II. Installation II-1. Hardware Installation 1. Always plug the powerline adapters directly into a power socket. It is important to point out that most powerline adapters will not work if plugged into an extension cord or uninterruptible power supply (UPS), and powerline adapters work better when plugged directly into the wall socket. Note: Powerline adapters must be deployed in sets of two or more. 2.
II-2. Connect a Powerline Network 1. Connect a powerline adapter A to your router via Ethernet cable, and then plug it into a power socket. 2. Connect another powerline adapter B to your computer, and then plug it into a power socket. Note: You can also connect the adapter to a printer, set top box, gaming console, TV or any other devices with a network port, to add the devices into the powerline network. 3. Make sure that the Powerline and LAN LEDs light up on both powerline adapters. 4.
II-3. Pair and Encrypt Powerline Network with Two Adapters The PAIR button allows you to set up a secure powerline connection with another HomePlug AV compliant powerline devices which also support the PAIR feature. 1. Press and hold the “PAIR” button on both powerline adapter A and B at the same time for one second, the PWR LED will start flashing. 2. Wait for about 2 minutes while the powerline adapters are trying to connect.
3. The connected network device on powerline adapter C is ready to go online. II-5. Remove the Existing Powerline Network Press and hold the “PAIR” button on powerline adapter A for 5 to 8 seconds. Powerline adapter A will reset and restart. Note: The PWR LED of Powerline adapter A will momentarily extinguish during resetting, flash during restarting then illuminate steadily.
III. FAQ III-1. The PWR LED does not light up. ˙ Make sure that the Powerline Adapter is properly plugged into a power outlet. ˙ Make sure the power outlet is active (working) by plugging another electric device into it. ˙ Re-plug the Powerline Adapter to the power outlet again. If the Power LED still fails to light up, then please contact your local dealer for technical support. III-2. The LAN LED does not light up.
COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/30/EU. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2014/30/EU. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 2014/30/EU. Polski: Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi warunkami określonymi Dyrektywą UE 2014/30/EU.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directives. Equipment: Model No.
Notice According to GNU General Public License Version 2 This product includes software that is subject to the GNU General Public License version 2. The program is free software and distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more than the costs of physically performing source distribution, a complete machine-readable copy of the corresponding source code.
intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2.
Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions.
