Quick Installation Guide

2
I-2. LED Status
LED
Name
Status
Description
PWR LED
On
Powered on
Off
Powered off
Blinking
The Powerline Adapter is detecting a
powerline link and in the pairing procedure
LAN LED
On
LAN port connected
Blinking
LAN activity (transferring data)
Off
LAN port not connected
Powerline
LED
On
The Powerline adapter is paired successfully
Off
No other Powerline Adapter detected
Note: The device will enter standby/power-saving mode 5 seconds after the device
disconnected with Ethernet cable, and all LEDs will extinguish without any data
transfer. Right after the Ethernet cable connected to the device, the three
LEDs will flash simultaneously while the device is leaving the
standby/power-saving mode.
PWR LED
LAN LED
Powerline LED