User manual

20
In „IP address‟ field, please fill in any IP address begins with „192.168.2‟, and ends with a
value greater than 2 and less than 254 (You can use the example in the picture
„192.168.2.339‟). In Subnet mask field, please fill „255.255.255.0‟. Please keep all other
fields empty, and click „OK‟.
If you changed the IP address of this IP camera and you forget it, there‟re 2 methods to
recover it:
Press and hold the „Reset‟ button located at the bottom of this IP camera, to clear all
settings of the IP camera and reset the IP address back to 192.168.2.3. You‟ll lose all
settings in the IP camera.
Ask network administrator to check the DHCP release table, if the camera was set to obtain
the IP address by DHCP, a new record will be added to DHCP release table on DHCP
server when the IP camera is connected to the local area network.