User manual

40
2.3.3 MJPEG
If you selected „MJPEG‟ as the video encoding format of this IP camera, you can specify the
parameters of MPEG4 video encoder here.
The descriptions of every setting in this menu will be given below:
Item
Description
Video Resolution
Specify video resolution of MJPEG video encoder.
Available options are SXGA, VGA and QVGA under
megapixel mode, VGA, QVGA, and QQVGA resolution
under normal mode. VGA resolution provides more
details than QVGA and QQVGA, but requires more
network bandwidth.
Video Quality
Specify video encoding quality of MJPEG video encoder.
There are five levels of video quality from highest to
lowest. Higher video quality provides better video quality,
but requires more network bandwidth.
Video Frame
Rate
Specify video refresh rate of MJPEG video encoder.
Higher video refresh rate provides more details about
motion, but requires more network bandwidth.
CAUTION: Choosing a low frame rate will save
bandwidth, but may not be able to capture every motion if
the object that IP camera points to is moving fast.
Click „Apply‟ to save settings and make the new settings take effect.