User manual

2.5 Motion Detection

Motion detection function makes this IP camera become your non-stop guard. You don‟t

have to waste all the time monitoring the images from the camera, and camera will detect

all motions for you. Once motion is detected, a captured image or video recording will be

sent to you by Email or via FTP.

You can access this menu by clicking „Motion Detection‟ on the top of web management

interface.

2.5.1 Motion Detection Settings

You can use this menu to setup basic motion detection settings:

The descriptions of every setting in this menu will be given below:

Item

Description

Motion Detection

Enable

Select „Enable‟ to enable motion detection, and select

„Disable‟ to disable this function.

Next Event

Detected Interval

Specify the time interval between two motion detections in

seconds. If a motion is detected after last detection time,

and before next detection time, nothing will be send by

Email or via FTP.

Please specify a time interval that suites your need. If the

time interval is too long, you may not be able to know what