User manual

88
3.5.1.4 Motion Record
With this function activated, only motions captured by the camera will be recorded, so you
don‟t have to waste hard disk storage space on images you don‟t need to pay attention to.
Here are the descriptions of all setting items:
Item
Description
Channel
Select the channel number you wish to set.
Enable
Enable motion record function.
Disable
Disable motion record function.
Recording Time
Select the time duration that camera will record when a motion
has been detected from dropdown menu in seconds.
Invoke alarm when
motion is triggered
Send an alarm when a motion has been detected by the
camera.
Send mail when
motion is triggered
Send an email to a pre-defined address when a motion has
been detected by the camera.
OK
Save settings in this tab.
Cancel
Discard all settings in this tab.
WARNING: For applications that security is highly concerned, it’s not
recommended to use this function since some tiny changes you may need
to know may not be able to trigger the camera and the camera will not start
recording.