User Manual

IV-3-1-3-1. No Authentication

Authentication is disabled and no password/key is required to connect to the

access point.

Disabling wireless authentication is not recommended. When

disabled, anybody within range can connect to your device’s SSID.

IV-3-1-3-2. WEP

WEP (Wired Equivalent Privacy) is a basic encryption type. For a higher

level of security consider using WPA encryption.

Key Length

Select 64-bit or 128-bit. 128-bit is more secure

than 64-bit and is recommended.

Key Type

Choose from “ASCII” (any alphanumerical

character 0-9, a-z and A-Z) or “Hex” (any

characters from 0-9, a-f and A-F).

Default Key

Select which encryption key (1 – 4 below) is the

default key. For security purposes, you can set

up to four keys (below) and change which is

the default key.

Encryption Key 1 –

Enter your encryption key/password according

to the format you selected above.

IV-3-1-3-3. IEEE802.1x/EAP

Key Length

Select 64-bit or 128-bit. 128-bit is more secure

than 64-bit and is recommended.

IV-3-1-3-4. WPA-PSK

WPA-PSK is a secure wireless encryption type with strong data

protection and user authentication, utilizing 128-bit encryption keys.

WPA Type

Select from WPA/WPA2 Mixed Mode-PSK,

WPA2 or WPA only. WPA2 is safer than WPA

only, but not supported by all wireless clients.

Please make sure your wireless client supports