User Manual

48
IV-3-1-5. Guest Network
You can setup an additional “Guest” Wi-Fi
network so guest users can enjoy Wi-Fi
connectivity without accessing your primary
networks. Enable a guest network and then configure the settings.
Guest Network
2.4GHz SSID
Displays the guest network name (SSID).
Guest Network
Enable or disable the guest network.
Guest Access Policy
Traffic Shaping
Enable or disable traffic shaping for the guest
network.
Downlink
Enter a downlink limit in MB.
Uplink
Enter an uplink limit in MB.
IP Filtering
Select “Deny” or “Allow” to deny or allow
specified IP addresses to access the guest
network. Select “Disable” to disable IP
filtering.
Rules
Enter IP addresses to be filtered according to
the Deny or Allow rule specified above and
check the box for each IP address to be
filtered.