Quick Installation Guide

I-5. Reset

If you experience problems with your access point, you can reset the device

back to its factory settings. This resets all settings back to default.

1. Press and hold the reset button on the access point for at least 10

seconds. Then release the button.

You may need to use a pencil or similar sharp object to push the

reset button.

2. Wait for the access point to restart. The access point is ready for setup

when the green power LED is on.

II. Quick Setup

The IAP1200 Long Range 802.11ac In-Wall Access Point features a range of

powerful functions:

- 802.11ac high-speed wireless technology

- 32 SSIDs

- SNMP v1/v2c/v3

Your access point can be up and running in just a few minutes. It can function

as a standalone access point (AP mode) or as part of an AP array (Managed AP

mode).

For use as a Managed AP in an AP array, the access point will automatically

switch mode when an AP Controller is configured as described in II-2.

Managed AP Mode: Edimax Pro NMS.